AR Blue Clean PW3082350, Total Stop System Assembly

(No reviews yet) Write a Review

$21.95

Brand: Accessories
SKU:: PW3082350
UPC:: 192216823501
Availability:: Usually Ships within 72hrs.
Width:: 19.00 (in)
Height:: 0.50 (in)
Depth:: 2.00 (in)
Minimum Purchase:: 1 unit

Current Stock:

Out of stock

Description
Warranty Information
Additional Information
0 Reviews
Manuals

This Total Stop System (TSS) replaces the part in your machine which enables the motor to shut down automatically when you release the trigger.

It works by sensing a build up of pressure inside the machine and shuts the motor down. When the trigger is pulled and water starts flowing, then pressure drops and the motor starts up again.

Is this the right part for your machine? Find a list of compatible machines in the Additional Information tab.

Benefits of a TSS:

Energy Efficiency: Reduces power consumption by shutting off the machine when not in use, leading to energy savings
Extended Motor Life: Minimizes wear and tear on the motor by cutting power in idle moments, prolonging the motor's lifespan
Enhanced Safety: Adds a safety layer by preventing unintended running, reducing the risk of accidents
Convenience and Ease of Use: Simplifies operation, as the machine only runs when actively used, enhancing user convenience
Reduced Noise Pollution: Decreases noise by stopping the machine in idle times, contributing to a quieter environment

Potential causes of failure:

Wear & Tear: Over time the part may just wear out. Depending on your usage it could last years before this is an issue.
Mineral build-up: Minerals from hardwater can build up inside the pump, causing the pressure switch to get stuck
- This makes it either fail to turn the motor on or off entirely, or worse, only slowing the pressure switch which can cause damage in the microswitch, an electrical component.

Maintenance:

You can try to lubricate the part before replacing it entirely! Most models using this TSS kit can utilize the instructions below.

TSS Lubrication Process

Prepare:

Start by removing all accessories and parts from the machine, then remove the pressure washer from the cart or wall-mount by disengaging the two latches on the side.

Tools:

8"+ Phillips head screwdriver or screw gun

Procedure:

Lay the machine down with the front side facing down.
Start by using a long Phillips head screwdriver (at least 8") to remove the screws all located along the edge of the backside of the pressure washer.

There are typically 8-10 total screws holding the front and back covers together.

Pull off the back cover.

If there is a hose reel on your machine, the hose reel will come off with the back cover.

Locate and remove additional Philips screws holding the pump to the front casing.

Skip this step if your TSS is accessible from the back.

Find the TSS module that is pressure-fit into the pump body.

It looks like a black L-shaped box with a wire leading to a split, one end going to the motor and another going to the power switch.
This is tight, and it may feel like it's going to break. Use a screwdriver as a lever if that helps, but it is going to come out before it breaks.

Pop the black module out of the hex-head nut that is screwed into the pump body.
Carefully remove the hex nut with a socket wrench. Sizes vary, but most commonly you'll find a 24mm works.

Small interconnected parts are behind this nut, so be sure to keep track of them all and how they fit together. Taking a photograph is the best way to be sure you get everything back together correctly.

Soak all these removed parts in vinegar or CLR (Calcium Lime Rust Remover) for 20 minutes.
After the soak, rinse the parts, then lubricate with white lithium grease or silicone grease.
Reassemble the machine by working steps 1-7 backwards.

Manuals

Sorry, we couldn't find any manuals for this product at this time. Please check back later.

Our warranty is from the date of purchase to the original purchaser and cannot be transferred.

The warranty covers manufacturer or workmanship defects at the time of sale that may develop under normal operational conditions. Our warranty is limited to repair or replacement only at the option of the manufacturer. The warranty does not apply to misuse, damage caused by non-AR North America accessories and normal wear items such as but not limited to: seals / packing, O-rings and valves.

Reasonable care must be used in conformity with operation and maintenance instructions in the owners manual. Failure to follow these instructions will void the warranty.

Blue Clean and Blue MAXX Consumer (non-commercial) pressure washer:

Warranty period of 2 years for pressure washer and 1 year for the accessories. Wear items are not covered under warranty.
This warranty will be void if the product is used in any rental or commercial application.
In the event a warranty evaluation is needed, the consumer will be responsible for freight costs.

Blue Clean Pro (commercial) pressure washers:

AR600 Series Electric Pressure Washers come with a 1 Year Commercial Warranty.
AR600 Series Electric Pressure Washer Accessories come with a 90 Day Warranty.
Warranty is to the original purchaser and is non-transferrable.
Warranty Claim may require product inspection.

Warranty Conditions:

Warranty does not apply to normal wear (such as but not limited to: seals/ packings, valves, plungers and sealing O-rings), freight damage, freezing damage.
Warranty does not apply to misuse when pump or accessories are altered operated above recommended speeds, pressures, or temperatures.
Warranty does not apply to damage caused by aftermarket accessories not included with original unit.
Warranty is void when failure to follow recommended operating and maintenance procedures, or failure to use OEM replacement parts.

Warranty is void when pump is damaged by:

The use of caustic (corrosive) liquids
Pump was operated under abrasive or corrosive environments where conditions could cause pump cavitation.

Liability of manufacturer:

Warranty is limited to repair or replacement of parts only.
Warranty Products must be inspected by the manufacturer.

Returned Product will be Repaired or Replaced Free of Charge if found to be defective and subject to warranty. After a completed inspection by the manufacturer, warranty is granted/ denied at the sole discretion of the manufacturer when such products are found to be of original defect or workmanship at the time it was shipped from factory.

This warranty is in lieu of all other warranties, expressed or implied, including any warranty of merchantability of any and all other obligations or liabilities on the part of the manufacturers or equipment.

Customer Return Liability:

1. Pumps and Accessories must have a Return RMA#
  1. Please keep the receipt as it will be required when submitting a warranty claim. Without the receipt the warranty claim cannot be processed.
2. Pumps must be shipped back with Shipping plug
3. Shipments without RMA# will be denied
4. Under no circumstance will the manufacture bare
  any responsibility for loss of unit, loss of time or
  inconvenience in any manner.
Customer is responsible for freight costs to return product for warranty
evaluation.
The nozzle(s) being used must be returned with the pump unit to be
considered for warranty.
A shipping plug (supplied) must be installed in the pump before
shipping to prevent oil seepage. Failure to secure the plug will result in a
maintenance charge.
The manufacturer is not liable for freight damage, insurance, labor, or any
consequential damages incurred as a result of defective product.
If returned product is found non-warrantable, associated repair costs
and return freight are the responsibility of the customer.

Pressure Washer Parts and Accessories (Purchased Individually):

Parts and Accessories purchased individually hold a 90-day warranty period for any manufacturer or workmanship defects from date of sale.

Please contact AR Blue Clean customer service with any questions or concerns.

Phone: 1-866-235-5112
Email: info@arblueclean.com

Compatible 100 Series:: AR112, AR118, AR141, AR142 ,AR240, AR240S, AR260
Compatible 300 Series:: AR383, AR383L, AR383S, AR388, AR525, AR527

Write a Review