AR Blue Clean Pro, AR630HW, 1600 PSI, 2.3 GPM, 20 Amp Hot Water Electric Pressure Washer with Accessories
- Brand
- Pro Line
- SKU:
- AR630HW
- UPC:
- 192216129245
- Width:
- 11.00 (in)
- Height:
- 13.40 (in)
- Depth:
- 20.90 (in)
AR Blue Clean Pro, AR630HW Hot Water Electric Pressure Washer, Induction Motor, Nickle Plated Triplex Pump With Accessories
The new and improved AR Blue Clean AR630HW showcases the same rugged performance and sleek all-black design as the original AR630-Hot, now with added hot water capability for enhanced cleaning power. Delivering 1600 PSI at 2.3 GPM, this professional-grade unit can handle inlet water temperatures up to 180°F (82°C), making it ideal for tackling grease, oil, and heavy grime in demanding cleaning applications.
Powered by a quiet, long-lasting 20-amp, 110V, 60Hz single-phase induction motor and paired with an Annovi Reverberi RCA nickel-plated brass pump with aluminum connecting rods, the AR630HW is built for reliable, all-day performance. Its updated design features built-in nozzle storage, an adjustable pressure unloader for precise control, and a 3-position “Dual Pro” switch, allowing users to choose between Total Stop System mode to conserve energy and extend pump life or Bypass mode for continuous trigger operation.
The AR630HW offers maximum flexibility with a molded carrying handle and bottom mounting brackets, allowing for handheld or fixed installation, making it a compact yet adaptable solution for professionals and serious DIYers alike.
This unit comes complete with a full accessory kit, including the MV925-MV70 Pro-Style Trigger Gun with built-in extension, AR3400960 M22 Quick Connect Metal Lance, AR3051635 30-Foot High-Pressure Hose, 5940 Quick Connect 34 oz. Foam Cannon, and four quick connect nozzles (0°, 15°, 25°, 40°).
Please note that the AR630HW does not heat water internally—it is engineered to accept hot water from an external source (up to 180°F) for enhanced cleaning effectiveness.
Key Features:
- Powerful Performance: 1600 PSI at 2.3 GPM, powered by a durable 20-amp induction motor and professional-grade Annovi Reverberi RCA brass pump.
- Hot Water Capable: Accepts inlet water up to 180°F (82°C) to tackle grease, oils, and tough residues.
- Dual Pro Operation: 3-position switch allows Total Stop System mode or Bypass mode for continuous use.
- Adjustable Pressure Unloader: Fine-tune pressure for specific tasks and accessories.
- Mounting & Portability: Molded handle and bottom mounting brackets for portable or fixed setups.
- Modern, Durable Frame: Fully enclosed all-black housing with integrated nozzle storage.
- Complete Accessory Kit: Includes MV925-MV70 trigger gun with extension, M22 metal lance, 30-ft high-pressure hose, 34 oz. foam cannon, and four quick connect nozzles (0°, 15°, 25°, 40°).
Manuals
Sorry, we couldn't find any manuals for this product at this time. Please check back later.
Our warranty is from the date of purchase to the original purchaser and cannot be transferred.
The warranty covers manufacturer or workmanship defects at the time of sale that may develop under normal operational conditions. Our warranty is limited to repair or replacement only at the option of the manufacturer. The warranty does not apply to misuse, damage caused by non-AR North America accessories and normal wear items such as but not limited to: seals / packing, O-rings and valves.
Reasonable care must be used in conformity with operation and maintenance instructions in the owners manual. Failure to follow these instructions will void the warranty.
Blue Clean and Blue MAXX Consumer (non-commercial) pressure washer:
- Warranty period of 2 years for pressure washer and 1 year for the accessories. Wear items are not covered under warranty.
- This warranty will be void if the product is used in any rental or commercial application.
- In the event a warranty evaluation is needed, the consumer will be responsible for freight costs.
Blue Clean Pro (commercial) pressure washers:
- AR600 Series Electric Pressure Washers come with a 1 Year Commercial Warranty.
- AR600 Series Electric Pressure Washer Accessories come with a 90 Day Warranty.
- Warranty is to the original purchaser and is non-transferrable.
- Warranty Claim may require product inspection.
Warranty Conditions:
- Warranty does not apply to normal wear (such as but not limited to: seals/ packings, valves, plungers and sealing O-rings), freight damage, freezing damage.
- Warranty does not apply to misuse when pump or accessories are altered operated above recommended speeds, pressures, or temperatures.
- Warranty does not apply to damage caused by aftermarket accessories not included with original unit.
- Warranty is void when failure to follow recommended operating and maintenance procedures, or failure to use OEM replacement parts.
Warranty is void when pump is damaged by:
- The use of caustic (corrosive) liquids
- Pump was operated under abrasive or corrosive environments where conditions could cause pump cavitation.
Liability of manufacturer:
- Warranty is limited to repair or replacement of parts only.
- Warranty Products must be inspected by the manufacturer.
Returned Product will be Repaired or Replaced Free of Charge if found to be defective and subject to warranty. After a completed inspection by the manufacturer, warranty is granted/ denied at the sole discretion of the manufacturer when such products are found to be of original defect or workmanship at the time it was shipped from factory.
This warranty is in lieu of all other warranties, expressed or implied, including any warranty of merchantability of any and all other obligations or liabilities on the part of the manufacturers or equipment.
Customer Return Liability:
-
- Pumps and Accessories must have a Return RMA#
- Please keep the receipt as it will be required when submitting a warranty claim. Without the receipt the warranty claim cannot be processed.
- Pumps must be shipped back with Shipping plug
- Shipments without RMA# will be denied
- Under no circumstance will the manufacture bare
any responsibility for loss of unit, loss of time or
inconvenience in any manner.
- Pumps and Accessories must have a Return RMA#
- Customer is responsible for freight costs to return product for warranty
evaluation. - The nozzle(s) being used must be returned with the pump unit to be
considered for warranty. - A shipping plug (supplied) must be installed in the pump before
shipping to prevent oil seepage. Failure to secure the plug will result in a
maintenance charge. - The manufacturer is not liable for freight damage, insurance, labor, or any
consequential damages incurred as a result of defective product. - If returned product is found non-warrantable, associated repair costs
and return freight are the responsibility of the customer.
Pressure Washer Parts and Accessories (Purchased Individually):
- Parts and Accessories purchased individually hold a 90-day warranty period for any manufacturer or workmanship defects from date of sale.
Please contact AR Blue Clean customer service with any questions or concerns.
Phone: 1-866-235-5112
Email: info@arblueclean.com
- Max Pressure (PSI):
- 1600
- Rated Pressure (PSI):
- 1100
- Max Flow (GPM):
- 2.3
- Rated Flow (GPM):
- 2
- Max Amperage:
- 20
- Voltage:
- 120
- Pump Mechanical System:
- Triplex
- Pump Material:
- Nickel Plated Brass
- Motor Type:
- Induction
- Total Stop System (TSS):
- Yes
- Bypass:
- Yes
- Max Water Inlet Temperature (℃/℉):
- 80/180-Does Not Produce Hot Water
- Portability:
- Built-in Handle with Mounting Brackets
- Inlet Thread:
- 3/4" BSPP (Standard Garden Hose Threading )
- Outlet Thread:
- M22 x 14m
- Made in:
- Italy
- Oil Capacity (f/oz):
- 9
- Oil Type:
- 30W, non-detergent
- Shipping Plug Size:
- 17 mm
- Drain Plug Size:
- 17 mm
- Drain Plug Torque Specs:
- Snug fit only, Do not accede: 100 (in/lb) or 11.3 (N.m)
- Gross Weight (lbs):
- 67
- Cord Length (ft.):
- 30
- Cord Gauge (awg):
- 12
- decibel rating (dB):
- 67-72
- Change oil (hrs):
- 50/500
- Trigger Gun:
- MV925-MV70
- Lance:
- AR3400960 M22 Lance
- Hose:
- AR3051635 30 Foot High Pressure Hose
- Foam Cannon:
- 5940, 34 oz. Fill Capacity
- Quick Connect Nozzles:
- NZMQC4P-040, 0ᵒ, 15ᵒ, 25ᵒ, 40ᵒ