AR Blue Clean Pro, F6 Foam Cannon Kit
- Brand:
- Accessories
- SKU:
- F6-Kit
- UPC:
- 192216157392
- Width:
- 10.00 (in)
- Height:
- 5.50 (in)
- Depth:
- 7.50 (in)
- Availability:
- Usually Ships within 72hrs.
AR Blue Clean Pro F6 High Performance Foam Cannon
Take your cleaning power to the next level with the AR Blue Clean Pro F6 Foam Cannon, designed for users who demand premium performance, versatility, and ease of use. Engineered with thoughtful details from top to bottom, the F6 delivers rich, clinging foam for deeper cleaning on vehicles, outdoor surfaces, siding, equipment, and more.
The F6 includes a pack of three interchangeable orifice sizes: 1.3mm, 1.5mm, and 1.8mm—so you can fine‑tune your foam output based on your pressure washer’s flow rate for maximum performance. A pre‑installed 1/4" quick‑connect plug offers instant setup, and the included M22 fitting provides compatibility with a wide range of pressure washer wands.
Inside, the F6 is just as refined. A stainless steel weighted ball attached to the suction tube ensures uninterrupted detergent draw—even when the bottle is tilted—so you get consistent foam from start to finish. On the outside, the F6 features a sleek all‑black design, a 34‑ounce capacity, and an easy‑to‑read fill line for simple and accurate mixing. For best results, AR Blue Clean recommends a 20:1 detergent dilution ratio.
A wide-body anti‑tip base keeps the F6 stable during filling, and the large bottle opening makes measuring and pouring effortless. With fully adjustable controls—including a variable spray pattern nozzle and top‑mounted foam output knob—you have complete command over your foam thickness and spray spread, allowing you to dial in exactly the performance you want.
Features
- Includes three interchangeable orifices (1.3mm, 1.5mm, 1.8mm) to match your pressure washer’s flow rate for optimized foam performance
- Comes preinstalled with a 1/4" quick‑connect plug for fast and easy setup
- Includes an M22 adapter for expanded pressure washer compatibility
- Stainless steel weighted ball keeps the suction tube fully submerged for consistent detergent draw at any angle
- 34 oz. bottle capacity provides ample detergent volume for extended cleaning sessions
- Easy‑to‑read fill line ensures accurate detergent measuring; recommended 20:1 dilution ratio
- Anti‑tip wide‑body base adds stability during filling and use
- Large bottle opening makes filling, mixing, and cleaning simple and mess‑free
- Adjustable variable spray nozzle lets you choose between a tight stream or a wide fan spray
- Top‑mounted foam adjustment knob allows quick control over foam thickness



Manuals
Sorry, we couldn't find any manuals for this product at this time. Please check back later.
Our warranty is from the date of purchase to the original purchaser and cannot be transferred.
The warranty covers manufacturer or workmanship defects at the time of sale that may develop under normal operational conditions. Our warranty is limited to repair or replacement only at the option of the manufacturer. The warranty does not apply to misuse, damage caused by non-AR North America accessories and normal wear items such as but not limited to: seals / packing, O-rings and valves.
Reasonable care must be used in conformity with operation and maintenance instructions in the owners manual. Failure to follow these instructions will void the warranty.
Blue Clean and Blue MAXX Consumer (non-commercial) pressure washer:
- Warranty period of 2 years for pressure washer and 1 year for the accessories. Wear items are not covered under warranty.
- This warranty will be void if the product is used in any rental or commercial application.
- In the event a warranty evaluation is needed, the consumer will be responsible for freight costs.
Blue Clean Pro (commercial) pressure washers:
- AR600 Series Electric Pressure Washers come with a 1 Year Commercial Warranty.
- AR600 Series Electric Pressure Washer Accessories come with a 90 Day Warranty.
- Warranty is to the original purchaser and is non-transferrable.
- Warranty Claim may require product inspection.
Warranty Conditions:
- Warranty does not apply to normal wear (such as but not limited to: seals/ packings, valves, plungers and sealing O-rings), freight damage, freezing damage.
- Warranty does not apply to misuse when pump or accessories are altered operated above recommended speeds, pressures, or temperatures.
- Warranty does not apply to damage caused by aftermarket accessories not included with original unit.
- Warranty is void when failure to follow recommended operating and maintenance procedures, or failure to use OEM replacement parts.
Warranty is void when pump is damaged by:
- The use of caustic (corrosive) liquids
- Pump was operated under abrasive or corrosive environments where conditions could cause pump cavitation.
Liability of manufacturer:
- Warranty is limited to repair or replacement of parts only.
- Warranty Products must be inspected by the manufacturer.
Returned Product will be Repaired or Replaced Free of Charge if found to be defective and subject to warranty. After a completed inspection by the manufacturer, warranty is granted/ denied at the sole discretion of the manufacturer when such products are found to be of original defect or workmanship at the time it was shipped from factory.
This warranty is in lieu of all other warranties, expressed or implied, including any warranty of merchantability of any and all other obligations or liabilities on the part of the manufacturers or equipment.
Customer Return Liability:
-
- Pumps and Accessories must have a Return RMA#
- Please keep the receipt as it will be required when submitting a warranty claim. Without the receipt the warranty claim cannot be processed.
- Pumps must be shipped back with Shipping plug
- Shipments without RMA# will be denied
- Under no circumstance will the manufacture bare
any responsibility for loss of unit, loss of time or
inconvenience in any manner.
- Pumps and Accessories must have a Return RMA#
- Customer is responsible for freight costs to return product for warranty
evaluation. - The nozzle(s) being used must be returned with the pump unit to be
considered for warranty. - A shipping plug (supplied) must be installed in the pump before
shipping to prevent oil seepage. Failure to secure the plug will result in a
maintenance charge. - The manufacturer is not liable for freight damage, insurance, labor, or any
consequential damages incurred as a result of defective product. - If returned product is found non-warrantable, associated repair costs
and return freight are the responsibility of the customer.
Pressure Washer Parts and Accessories (Purchased Individually):
- Parts and Accessories purchased individually hold a 90-day warranty period for any manufacturer or workmanship defects from date of sale.
Please contact AR Blue Clean customer service with any questions or concerns.
Phone: 1-866-235-5112
Email: info@arblueclean.com
1 Review Hide Reviews Show Reviews
-
I've been waiting for this
I've been waiting for this Foam Cannon to come out ! All other foamers I have used with my AR635 just don't cut it. This one has a 1.8 mm orifice and should do the trick. Can't wait to try it out.
US Dollars
Accessories
Blue Clean
Blue Legacy
Pro Line
Shop All